Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> DCC Sound Reset Value Bachmann EZ Command
gdaygwr
post 23 May 2020, 13:15
Post #1


Ticket Collector
**

Group: Members
Posts: 12
Joined: 28-September 10
From: Sydney Australia
Member No.: 8,789



Hello Everyone

I would love some advise on the following.

I own a Bachmann E-Z Command Spectrum Dynamis, which only has the ability for 3 digit coded decoders.

I purchased second hand 10 plus sound decoded locos that have a Hornbys Elite 4 digit code.
The locos are a mixture of Heljan, Bachmann and Hornby, some factory fitted, some fitted by SWD.

I want to set them all back to the default 003.

Can you please help me with how I can do this using my Bachmann unit.

Regards

Derek
Go to the top of the page
 
+
34C
post 23 May 2020, 20:29
Post #2


In depth idiot
**********

Group: Members
Posts: 7,155
Joined: 31-May 07
Member No.: 1,818



If you really do want to reset the decoders (which not only resets the address to 03 but also restores all the addressable CV's to
factory default settings) then you need to look at the decoder manuals specific to the installed decoders for the number to enter
in CV8. (Common values are 8 or 33, but there is no universal standard).

If you only want to change the address of each decoder to your own choice, then all that requires is to change address on the
programme track, using whatever is the standard method on your system.

(Unable to offer any more specific advice, as I know nothing about your system or these decoders.)
Go to the top of the page
 
+

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS    Lo-Fi Version Time is now: 26th May 2020 - 01:16