[chriswright03]

Help needed by anyone out there. Four of us from our model rail club have been to the York show today and whilst there we were looking for a double chimney for the A4 without success. Does anyone know who might be able to supply one? None of the traders had one or even could tell us where to source one. Any help would be much appreciated.

 

[chriswright03]

QUOTE (Colombo @ 9 Apr 2007, 13:38) <{POST_SNAPBACK}>Chris,

If you are looking for one in 4 mm scale try Puffers on http://www.puffers.co.uk/2006Pricelist/Pri...roducts2006.doc

Part no. EO67

Colombo
Thanks for that you are a star. I have emailed Chris Parrish to see if he has one in stock. Once

again thanks for your help much appreciated.

Chris Wright

 

[chriswright03]

QUOTE (chriswright03 @ 9 Apr 2007, 19:25) <{POST_SNAPBACK}>Thanks for that you are a star. I have emailed Chris Parrish to see if he has one in stock. Once

again thanks for your help much appreciated.

Chris Wright
Still looking I am afraid. Chris Parrish does not have any.

 

[chriswright03]

QUOTE (Colombo @ 14 Apr 2007, 09:50) <{POST_SNAPBACK}>Chris,

Martin Finney advertises a 4mm kit for a double or single chimneyed A4 on his web site. He may sell you a chimney.
http://website.lineone.net/~cbwesson/4mm.htm

Colombo
Thanks for that but can you send me the web address of the site as this link just brings up one page with no contact details. I can contact them then and ask the question. It is proving very difficult to source but thanks again for your help.

Regards Chris Wright

 

[chriswright03]

QUOTE (Colombo @ 14 Apr 2007, 21:28) <{POST_SNAPBACK}>Chris,

Please try http://website.lineone.net/~cbwesson/ for contact details

Colombo
Thanks for that and thanks to Andy as well for his assistance. I have sent them an email so I shall let you know how I get on.

Cheers Chris Wright

 

[chriswright03]

QUOTE (chriswright03 @ 14 Apr 2007, 22:38) <{POST_SNAPBACK}>Thanks for that and thanks to Andy as well for his assistance. I have sent them an email so I shall let you know how I get on.

Cheers Chris Wright
Hi guys well that is another dead end as Martin Finney does not supply parts from his kits. Still worth a try so thanks anyway. The search goes on.

Chris

 

[chriswright03]

QUOTE (Colombo @ 16 Apr 2007, 09:51) <{POST_SNAPBACK}>Chris,

Have you tried a Hornby spare parts dealer?

http://pages.123-reg.co.uk/dorian2-579935/

Colombo
Well I presume so because the guy who need the chimney is a Bachmann and Hornby dealer but I will ask him.......you never know sometimes we all miss the obvious.

Thanks Chris

 

[chriswright03]

QUOTE (cbeagleowner @ 24 Apr 2007, 16:05) <{POST_SNAPBACK}>Other places you could try are SE finecast as tehy produce a whitemetal A4 and Wessex Proscale as they have a brass A4 with a w/m chimney. Proscale are availaible through intercity models I think. They may be able to help you. The man who probably knows best about stuff like that is Dave Cleal at Mainly Trains. He has loads of bits and bobs availaible.
Thanks for that I shall give them a try.

Chris Wright