Model Railway Forum banner
1 - 1 of 1 Posts

10 Posts
I use the ribs and spokes from an old umbrella. The ribs make great gutters and the spokes are ok for downspouts.

I glue the gutter to a piece of card and glue the assembly under the eaves. The downspouts I attach using a thin band of card every so often as a clamp around the pipe and stick them to the wall. I then paint the clamps the same colour as the downspouts.

Richard Davies
Utah, USA
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.