Model Railway Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
6,202 Posts
Hi Josek,
Welcome to the forum


Kato track is more widely available and is a good system to use for DCC being pre ballasted it is quicker to lay and wiring it to DCC is easy a friend doesnt solder to the track using the joiners to trap the wires in without problems, the points are a lot easier as well having built in motors within the track housing saving disguised surface mounted motors.

Have a look here for the range available http://tinyurl.com/5azyfq they will be able to give you more details on your requirments.

A review of Kato track is here but you need to click on the + icon at the top of the screen to save squinting to read it. http://tinyurl.com/6d7wwh
It clearly shows the point motor inside its housing saving on a lot of work in the usual conventionally.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top