Model Railway Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
487 Posts
Discussion Starter · #1 ·
Unfortunately Bachmann soldered power pick wires are so taut on the cl158, that continual movement of the bogies especially over curves, finally severe the soldered wires.
My age has finally caught up with me, when eye sight and a steady hand are no longer. Models being made from plastics, respond drastically to a erratic held hot soldering iron.
Any assistance will be most appreciated.
 

·
Registered
Joined
·
487 Posts
Discussion Starter · #3 ·
Hello John, my sincere thanks for your kind words and advice offer.
I live between Glasgow and Edinburgh "Central Belt"
. I hope this will suffice.
Kind regards.
 

·
Registered
Joined
·
487 Posts
Discussion Starter · #7 ·
I decided to contact Bachmann Service Department direct, requesting that my plight be considered.
Bachmann have replied, that I send the cl158 for their inspection and repair as necessary.
Bachmann standard service charge + parts appear to be very reasonable and I am certainly taking up their offer.
Thanks again to all who took interest in my request for help.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top