Model Railway Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,275 Posts
I know where you can get one but the price is A$650. They are a well detailed model. Very impressive with all the little bits and pieces you get to add to them. It's a pity that they are such terrible runners. The usual crap Bachmann mech from the old plus range I think.

Ozzie21

QUOTE (Dennis David @ 25 Jun 2006, 12:04) <{POST_SNAPBACK}>Thanks but I was looking for another model one with chinese flags in the front I think
 

·
Registered
Joined
·
1,275 Posts
Well I guess my cousin bought a dodgey bros loco. The one he bought came in a presentation box with all the nice chinese characters all over it. I installed a decoder in it and we gave it a run. Terrible noise, all squeaks and grinds. I pulled the loco to bits to give it a lube job and found the same old split chassis with the same old krader motor driving the same old gear train as can be found in any old Plus loco ansd some Spectrum models. On the outside it's an excellent model of a Chinese QJ and the detail is well above that which they apply to any of their other models apart from the SJ 2-8-2 which has the same level of detail. At the price they are asking I would expect a brass quality mechanism with a Sagami motor driving an individual gearbox and all wheels sprung. It's a nice shelf model.

Ozzie21

QUOTE (pedromorgan @ 24 Jul 2006, 20:10) <{POST_SNAPBACK}>ozzie thats nonsence. they are fantastic runners. it was a new mech for a totally new loco.

Peter
 

·
Registered
Joined
·
1,275 Posts
Why take it back and wait for weeks maybe months to get a loco repaired that's not available anymore when for an hour's work I fixed it so that it know runs like a the poverbial swiss watch. I've only ever returned one loco in 30 yrs and it took 7months to get returned from Bachmann. I have ones that were non events in shop, always get then to test run a Bachmann or any model made in China, that were replaced on the spot. All the others I've repaired myself. When you have direct access to the place where you bought the model it makes it easy. For me it could be up to 7hrs or 850klms drive to take it back so I tend to be self sufficient and just fix the odd factory stuff up.

Ozzie21

QUOTE (pedromorgan @ 25 Jul 2006, 15:17) <{POST_SNAPBACK}>For goodness sakes. if it has a "Terrible noise, all squeaks and grinds" TAKE IT BACK. on another part of the forum the brittish are accused of making do with poorly running models!!

mine is silky smooth and is on a par with either of my BLI loco's.
the loco is a plesure to own. i have never had the body off and i dont intend to. parts of the chassis may well be common with other models but it was a new design for the QJ. my only criticism of it is that it is a tad weak. but then so are the real things! (and it wont go under the bridge on my mates layout!)

Peter
 

·
Registered
Joined
·
1,275 Posts
Ahh those were days! two bob for pocket money and 3quid for a Jinty. It took a lot of saving to get that Jinty and even longer to get a Princess and that was CKD " completely knocked down" was the ad. I learnt eary on after oiling my brand new "BLue Pullman" xmas present that over oiling did no good. I think I tipped a near whole bottle of Singer oil into the mech. Dad was not amused.

Ozzie21

QUOTE (John Webb @ 26 Jul 2006, 19:14) <{POST_SNAPBACK}>In my early teens I used to service Triang locos for my local model shop in return for a bit of pocket money. It was amazing what people bought locos back with. Over-oiling was top of the list, followed by dirty wheels followed by hair/carpet fluff mixed up in the mechanisms - or all three! At 2/6 (12.5p) per loco it was easy, if not regular money in hand.
Regards,
John Webb
 
1 - 4 of 4 Posts
Top