Joined
·
750 Posts
Just some possible useful information:-
I don't own a Dynamis but reading other forums have found out some tips and possibly good advice.
1. Some users are reporting a loss of signal between handset and receiver, to overcome this they have turned the timeout setting to 'NEVER'
It has also been suggested that if you are using the system in a room which has the low energy type light bulbs in that these can cause a problem.
These type of lights also give out infra-red light which can cause a problem, it has been suggested that you replace the bulb with a standard light bulb.
2. Some one has fried the receiver, they think they may have shorted out the pins on the base of the unit, he has had it replaced, but is putting some insulation tape over these pins.
Like I say I have no idea if any of this makes sense as I don't own one, but thought I would post it for other owners reference and possible solutions if any are having problems.
Ian
I don't own a Dynamis but reading other forums have found out some tips and possibly good advice.
1. Some users are reporting a loss of signal between handset and receiver, to overcome this they have turned the timeout setting to 'NEVER'
It has also been suggested that if you are using the system in a room which has the low energy type light bulbs in that these can cause a problem.
These type of lights also give out infra-red light which can cause a problem, it has been suggested that you replace the bulb with a standard light bulb.
2. Some one has fried the receiver, they think they may have shorted out the pins on the base of the unit, he has had it replaced, but is putting some insulation tape over these pins.
Like I say I have no idea if any of this makes sense as I don't own one, but thought I would post it for other owners reference and possible solutions if any are having problems.
Ian
