Model Railway Forum banner
1 - 1 of 29 Posts

· Registered
352 Posts
Hello Brian
I have had a DCC set up for about 15 months now and although i have had some problems and are still suffering some i would not go back to conventional dc controls. the system i am using is the Lenz LH100, you can program your locos with this unit as well as operate your trains, you can give each locomotive an address of upto 4 numbers, i use the last 2 numbers on the side of my locos as their address, the problem i seem to have is with the older stock, there is a tread in the DCC section of the forum that is just starting to tackle what decoder should be fitted to what loco, as the older locos can be a bit temperamental, but hopefully the expertise of some more proficient users will help us all through the jungle of information.
1 - 1 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.