Model Railway Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
278 Posts
Discussion Starter · #1 ·
Dear All,

It took awhile to get my Liliput BR45 going, once it was run it it performed OK would pull 18 plus wagons, my ROCO 03 would pull about the same or a few more, so then I tried my BRAWA 06 and what a surprise, with only 5 wagons it slipped at a certian point on the track every time, the best that it would do was 3 wagons and even then it still started to slip, as the drive is from the Loco wheels and it is quite heavy I could not believe it, also the radii of the track at that point is quite large although it is on a curve

Another modeller suggested that the axels might be not all together or something like that, it is brand new out of the box but did come from overseas, I was just wondering if anything might have happened to it that would make it do what I have described.

Regards

Anthony
 

·
Registered
Joined
·
278 Posts
Discussion Starter · #6 ·
Dear All,

I will be on holidays for two weeks, when I get back I will do a lot of tests after the postings here and report back, I have also discussed this with Neil Woods as wellas he has the same Loco.

Regards

Anthony
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top