Model Railway Forum banner
1 - 1 of 11 Posts

· No Longer Active.
13,704 Posts
Before you connect anything I suggest that you double check the current drawn by the smoke generator on 16v or the only smoke you get may very well be from the decoder !

Also, bear in mind that on most decoders 500mA is the maximum total you can draw from the function outputs e.g. 4 x 125mA/2 x 250mA/1 x 500mA.

Seuthe make DCC versions of their smoke units as well as DC ones ! If your locomotive already has the smoke unit fitted it is almost certainly a DC version.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.