Model Railway Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Output B is a constant 12 volts dc that will supply 10 watts. Points are operated using a 'passing contact' switch, meaning that the supply is not permanently connected, therefore you can operate as many points as you wish.
Output C is 15 volts ac and will supply 15 watts. This can be used for other accessories such as lighting.
You will need a controller for each loco, not on the same track of course.
Hope that helps if you are still logging on here as your query is a few days old now.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top