Model Railway Forum banner
1 - 1 of 7 Posts

· Premium Member
6,205 Posts
QUOTE (poliss @ 27 Sep 2008, 14:45) <{POST_SNAPBACK}>I would say disassemble it and check for shorts. I had a similar problem when programming a loco, it nudged forward as if it had been programmed, but it turned out that it had a sneaky little short circuit which was hard to find.

I would agree with poliss i had the same happen to me ...... the culprit the grey wire with the tiniest of nicks in it after nipping on the chassis .... got away with frying the decoder that time
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.