Model Railway Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
4,854 Posts
Hi Cookiechem,

Normally I would say that your boards will need bracing at 1ft centres but you might be able to do away with bracing if you used a good quality thick (18mm) plywood as a baseboard instead of your proposed MDF.

I'm not a great fan of MDF at the best of times and, bearing in mind that you probably need to work to tighter tolerances than for war-gaming when laying and jointing track, I think you might be tempting fate to use it without bracing.

Regards,

Expat.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top