Model Railway Forum banner
1 - 3 of 3 Posts

· Registered
284 Posts
Discussion Starter · #1 ·
Can any one help me here please.

I just bought a dynamis today, got it home and decided to try it out on my length of programming track. No problems all worked well.

Then to the main track, all ran fine.

Then the green light on the receiver went out and the orange one came on constant for about 5 seconds then went out.

I now have nothing from the base unit at all no lights.

I have left it unplugged now for an hour aantried again... nothing.

Am I missing some thing or is it back to the shop?


Cpt Jack

· Registered
16 Posts
Maybe it's the power supply/ jack plug power connection/fuse?

If the handset is not active, the green and amber flash continually on the base unit until it detects a handset - if there are no lights that suggests no power.

Probably best to take it back to the shop.

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.