Model Railway Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
149 Posts
Discussion Starter · #1 ·
anyone who has the ecos. there is a firmware update 1.05. from the german web site, you need to register to download.

john
 

·
Registered
Joined
·
149 Posts
Discussion Starter · #8 ·
neil,

on the computer there is 2 connection. first the usb ports. second lan (local area network) these are the main connections, what you need is a cat 5 lan cable. plug one end into the ecos and the other into the computer. then setup a network connection, in the ecos manual near the end you will see a reference to an ip address there is a number something like 168,168,1,72 where this number would be the ecos address. you the put this into the network setup with a password. once setup you use your web browser use the above number and then access the ecos data. were you can up-load the up-date or save your current data.

if your using a broadband connection thru the lan network you will need a modem/router, this will give you 4 wireless and 4 wired connections
it's setup is nearly the same as windows. this way you can connect to the net and ecos at the same time.

john

p.s. hope this helps you neil
 
1 - 2 of 2 Posts
Top