Model Railway Forum banner
1 - 3 of 3 Posts

· Administrator
10,744 Posts
Can't say I've had this happen to me but...

Make sure that you follow the shutdown procedure - press stop and wait for it to say it's ok to power off. This gives the internal PC time to ensure any new information gets saved to flash.


· Registered
6 Posts

Only joined this forum today, looking to find out more on the ESU tips and tricks. I have the 50200 and use the loksound decoder to all my locos.

Recently installed the 50708 lighting strip tp three of my coaches, 50200 registered the coach with the lighting and worked fine when coach was on the track. Remove the coach from the track, can't find were the 50200 has saved the info. ?

I had the steam loco ticked in order to save the coach with lights in this area but nothing shows, any help to overcome will be appreciated.

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.