Model Railway Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,679 Posts
I did this some years ago with some Mainline SKs I converted into 4REP and 4TC driving coaches. I used Plastic Wood and filed it smooth then filed out the driving window aperture. I would guess the same technique would work with the Bachmann coaches - use some thin plasticard behind the windows before adding the filler. Milliput would probably work even better (I didn't have this at the time I did the original conversions). Be prepared to have two, or even three "bites" at the job as fillers can shrink or distort as they dry.

I should add: had the Bachmann Mk 1s been available when I did my conversions I would certainly have used them in preference to anything else!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top