Model Railway Forum banner

Flashing lights after a short

4444 Views 13 Replies 7 Participants Last post by  zmil
Having got my N scale layout up and running with a Lenz Set 100 in control, if I get a short then any loco fitted with a Lenz mini-gold decoder (via a NEM651 socket) sits there with the lights flashing once the short is reset. The locos with TCS M1s don't seem bothered! I cannot find a simple way of resetting them but assume there must be one. If I lift the loco off the track and replace it, it's fine but not ideal to say the least.

Anyone able to give me a simple pointer as to what is happening here please and a better way of resolving the reset?
1 - 1 of 14 Posts
Hi on the subject of voltage on Lenz equipment i have a TR150 power supply from them which is sekundar i presume is the output 15V i intend to use with my NCE procab for my N gauge American layout, do i need to turn down the voltage in the same way as it is a sealed unit with no adjustment facility i can find on it.
Or will the procab adjust the voltage going to the track.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.