Model Railway Forum banner

Fleischmann DCC

4777 Views 8 Replies 4 Participants Last post by  Marek_K
Having always bought Fleischmann piccolo locomotives with decoders already installed I decided to buy a non-DCC loco (867260) and a decoder (6858), having installed the decoder in the locomotive I now cannot get it to work.

Should the decoder have come with an address?, I cannot see one in any of the instructions that came with it.
If no address obvious then can the Twin-Centre 'read' the address from the loco on the track?

As a separate matter I cannot see from the Twin-Center handbook how to change loco addresses, it's probably in there somewhere but where?

1 - 2 of 9 Posts
The FLM Twin_centre manual is not really that easy to follow - once you have mastered the way to get to programming it is very easy. We use them on SL - trouble is I can only remember how to do it when the TC in is front of me !

If you get stuck send me a PM & I will "talk" you through it.

Hope this helps.
QUOTE (Marek Klimczyk @ 18 Apr 2008, 11:06) <{POST_SNAPBACK}>Does anyone knows where I can find technical info or description of the decoders and point me to it?

Hi Marek,

I have some FLM decoder manuals - if you want I could scan what I have & e-mail them to you.

Send me a PM with your email address if it's any help.
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.