Model Railway Forum banner
1 - 4 of 37 Posts

· Registered
Joined
·
229 Posts
Discussion Starter · #1 ·
Knowing that there are quite a few knowledgable people on this forum, do any of you know what code rail the Fleischmann Profi-Track uses? Also can anyone explain the difference between Fleischmann turntables code # 6052C, 6152C and 6651C? The Fleischmann website is not very clear in this respect apart from 6651C being compatible with OO gauge track (but what type?).

Thanks in advance,

Dan
 

· Registered
Joined
·
229 Posts
QUOTE (neil_s_wood @ 8 Jul 2007, 23:33) <{POST_SNAPBACK}>The difference between the three is the type of track they use. One has preballasted track, one uses brass rails and the other which is the one you will want has nickel silver rails. I use this one with Peco 100 track and it's fully compatible as shown below.
Ok, I'm going to be a bit of a pain now - if I wanted to use the Fleischmann preballasted track for the roundhouse (9 roads) and Peco track for the access road and sheds on the other side; which would be the best choice? Perhaps the same one but use the adapter fishplates?

Just to explain, after having to spend a few days freeing my roundhouse and the track from the old layout, I want to make it easier next time round. I reckon the best way of achieving this is to keep the baseboard immediately around the roundhouse and entrance tracks clear to allow it to be simply lifted off in future. The Fleischmann track would help a great deal in that respect, but I want to use the Peco stuff on the other side for the inspection pits etc.

Regards,

Dan
 
1 - 4 of 37 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top