Model Railway Forum banner

Fleischmann Turntable is broken

13898 Views 20 Replies 9 Participants Last post by  Bang Road
My Fleischmann Turntable (6651C) is not working. It just stopped. It was fine the other day and not it doesn't work.

The solenoid that activates the release that allows the bridge to move on to the next track clicks, so there is power getting there and the motor takes power from the same connections.

It maybe the motor, I'll try to feed it with some AC power to isolate and the problem

Anybody have a similar problem?

Do shops sell replacement motors?
1 - 1 of 21 Posts
QUOTE (zmil @ 13 Sep 2008, 21:22) <{POST_SNAPBACK}>Hi Doug

My turntable is in storage (with everything else) so I cant have a look
But as far as I am aware the motor is powered directly from the switch and takes the full 16Vac
Looking at the service sheet _ there is a 3 contact block which transfers power from the motor drive to the bus
this may have come adrift

Hope this helps
Regards Zmil

***The motor is DC...

See less See more
1 - 1 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.