Model Railway Forum banner
1 - 1 of 3 Posts

· Registered
104 Posts
Hi Mark,I use a Digitrax AR1 Automatic Reverse Controller on my Turntable which I built myself ,all converging tracks to the Turntable are wired to the track buss wire, the Turntable track is wired to the Reverser Unit,check the Digitrax webb site it explains how to wire the AR1, Bromsgroves sell these units if you live in the uk,hoping this might help Mike.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.