Model Railway Forum banner

Flying Scotsman O Gauge model (Hachette Partworks)

1704 Views 4 Replies 3 Participants Last post by  famousmari5
Hi I'm Lyndon Chow (FamousMari5) from Auckland, New Zealand 馃嚦馃嚳
And this is my O Gauge model of the Flying Scotsman I just build from the "Hachette Partworks/DJH models" that come with model parts for this locomotive, in every magazine I collected from every issue 1 to 125. The model took me, 9 years to build from 2012 to 2021 and it my first time I started working on model railways with this locomotive.

Is it possible to run it, or just for display?
I'm on my way to running my train and getting my display case built (behind the loco).
Train Wheel Vehicle Rolling stock Steam engine
See less See more
  • Like
Reactions: 1
1 - 5 of 5 Posts
There was a power kit for this loco, from the magazine. The gearboxes and motors are readily available from other manufacturers thou.
There was a power kit for this loco, from the magazine. The gearboxes and motors are readily available from other manufacturers thou.
I already ordered the gearbox and motor fitted on it and I even got it running and tested during the trial:

And of course I had to join the Auckland Model Railway Club to get some tips on how run the train as a beginner.
  • Like
Reactions: 1
Congratulations! You have built a superb model.

Terry
Congratulations! You have built a superb model.

Terry
Thanks
1 - 5 of 5 Posts
Top