Model Railway Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
375 Posts
Gary is absolutely right and it's the same method I use. There is just one point I would like to mention and that is if your scatter material is very dry and close to something that you don't want the glue mix to go on then drop some clear water on it first as there is always the chance that your glue mix will form globules and roll to where you don't want it, this is especially true if you are new to this method of application. Just a thought.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top