Model Railway Forum banner
1 - 1 of 8 Posts

· Registered
78 Posts
Hi Andy

I used one of these until about a year ago when I gave it to work colleague.

Much the same problem. I used pins and wires from the Gaugemaster range to wire into the 16V ac output.

I then connected these to a couple of "splitter" multi-connectors, which can more or less take an infinite number of connections from points etc.

1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.