Model Railway Forum banner

Help with a D connector please

1778 Views 9 Replies 7 Participants Last post by  Gordon H
Hi All,

Can i run 12V DC for track power and accessories /16V on the same D connector my thought are to have 12V track power on two of the pins for a shuttle the same on another two pins for a seperate track and the same for 12V accesories /16V using 8 pins in total on one connector is this safe and possible

Any help would be appreciated.
See less See more
1 - 1 of 10 Posts
One simple tip when you solder wires to a D plug. Make sure you have the male and female plugs joined up, so that you don't have pins dropping out of line if the plastic gets a bit soft with the heat.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.