Model Railway Forum banner
1 - 1 of 4 Posts

· DT
5,345 Posts
What do you mean "wired the resistor form the blue to the red and then the black"?

The light should be connected to a function output. The Blue is the common return from all the functions. The light should be wired up to the yellow/blue, white/blue or purple/blue.

The front light is usually white/blue and the real light (if you have one) is usually yellow/blue.

Front and back lights are turned on and off by F0 (Function zero).
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.