Model Railway Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
595 Posts
Discussion Starter · #1 ·
I have a Hornby class 50 and want to chip it but can't seem to get the body off.
One end lifts off but the other end (where the louvers are) seems to be glued. I don't want to force it and damage the body.
Has anybody else had this problem?. I think it is one of the early ones issued , 50 037 Illustrious (R2428).

I have 5 or 6 of these loco's and will have a look if these have the same problem.

I also remember reading somewhere that there could be a problem fitting decoders to these locos as the pcb boards are faulty in some of the early ones.

Many thanks in advance BAZ
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top