Model Railway Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
6,202 Posts
Not sure about Hornby decoders but i tested a couple of Bachmann HO locos last night that came DCC fitted and they lost their addresses only working on address 03 ....... after addressing again they seem to be fine , if it persists i'll either sell them on or fit a different decoder ....unless someone could explain why it happened.
Powercab control was used.
 

·
Premium Member
Joined
·
6,202 Posts
Thanks to all for the replies on the decoder fitted by Bachmann, i suspect they are the E-Z type fitted and eventually i will replace them with TCS which always perform well, also i have noticed a hum before the motor cuts in i hope stops once they are fitted with TCS.
 
1 - 2 of 2 Posts
Top