Model Railway Forum banner
1 - 1 of 6 Posts

· Registered
418 Posts
QUOTE (Mike H. @ 26 Jan 2009, 15:40) <{POST_SNAPBACK}>Try simply running the turntable off a separate 16V feed and plumbing in your own toggle switch - NOT running it off the track feed as suggested. That's what I've done and it works fine - ish - I have other problems with it but not the one you mentioned. I don't think the extra voltage will harm the motor but check with others ... I do not want to be repsonsible for fire/explosions..

I think it is only designed to run off a 12v DC supply (preferably controlled). 16volt is usually AC and will probably damage the motor.
David Y
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.