Model Railway Forum banner
1 - 1 of 1 Posts

· Registered
18 Posts
Discussion Starter · #1 ·
I have just installed a Express models dcc lighting kit in the front and rear cars, as per instructions.
They in turn have been wired up to two , four function only decoders by digitrax.

I connected the RED and BLACK to the track pick up, and the remaining ones to the lighting board wires, white to white, yellow to yellow etc.

In theory it should work, it does but only when it wants,

You can select the function., keys and nothing happens or if they come on they wont go off.

I have no reason to suspect both decoders are faulty I have used various digitrax decoders before without problems with my Prodigy.

Any ideas
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.