Model Railway Forum banner
1 - 1 of 1 Posts

· Registered
642 Posts
Discussion Starter · #1 ·
Well after some searching I managed to track down 2 Fna nuclear flask kits on e-bay and to be honest for a first go at kit building I am finding it pretty good going so far.

I have managed to remove the body from my donor wagon to leave it's base and bogies for the kit to sit on.

and after about 30mins I managed to remove the flash from the actual kit.

I prepared the parts for the main coats of paint by spraying a base coat of a car primer and then once dried I have started to apply the first coat of the final colours of the main kit parts. Here is a picture of the kit at this stage so far.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.