Model Railway Forum banner

LED lights in Semaphore signals Help

5390 Views 6 Replies 5 Participants Last post by  Brian Considine
I am about to convert my collection of MSE semaphore signals to working LED lights and want some help with what sort of power supply do I require. All the LEDs are 1.8 mm and will number about 30. So what voltage is required to power them and what of the requirements to wiring, can they be wired as one for example?
I have a gantry that will require 14 lamps for example so what of that as well.
Thank you for any advice.
1 - 1 of 7 Posts
If you haven't already done so, check out this thread

4mm scale Signal wiring

For anyone interested in learning more about MSE signals try this one

Lancashire Fusilier's first 4mm scale semaphore kit

1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.