Model Railway Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,209 Posts
The Lenz function decoder has a useful ability to work with just two wires to the lights ie it can be simply inserted directly between the existing lighting wires and the pick ups.

The TCS decoders have a "decoder lock" which means that if you have two or more decoders on the same CV1 then you can lock / unlock each decoder as needed for programming without affecting the others.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top