Model Railway Forum banner
1 - 3 of 15 Posts

· Registered
Joined
·
141 Posts
dwb, I don't know if there's anything amongst the selection here that may be suitable. There seems to be mains voltage LED GU10's and low energy GU10's available. The LED data sheet qoutes 3000mcd and a power of 1.5w so I wouldn't have thought they're going to be very bright.

http://www.rapidonline.com/products.aspx?t...;tier3=Lighting

Steve

PS sorry if I've missed your point completely.
 

· Registered
Joined
·
141 Posts
Sorry David I can't help you with light output as my knowledge of all things light related doesn't stretch that far. The description does say however "These high efficiency GU10 lamps use 20 LEDs (Light Emitting Diodes) to give a bright, vibrant beam of light" so anybody's guess I suppose.

There are some other lighting bits and pieces from the same site here if you haven't already found them :

http://www.rapidonline.com/products.aspx?t...ier3=Power+LEDs

Steve
 

· Registered
Joined
·
141 Posts
Thanks for the link David. You're right about halogens and heat. I find even the ones in our bathroom start to burn the top of my head if I take too long shaving
If you do try some LED GU10's I'd be very interested to hear what you think of them.

Steve
 
1 - 3 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top