Model Railway Forum banner
1 - 3 of 9 Posts

· Premium Member
8,102 Posts
QUOTE (Anthony James @ 18 Sep 2008, 10:56) <{POST_SNAPBACK}>Dear All,

I have a brand new Liliput BR45 with sound, it certainly sounds terrific with the Loksound 3.5 however the pulling power seems not to be very good, it stalls on in incline of only 12mm in 600mm when pulling only 5 wagons, I was just wondering if anybody else has one and if the problem might be the motor or the gearing , it does have traction tyres and runs perfectly in a straight line, or it might have something to do with the decoder setting for acceleration and braking, anybody have any ideas?


Anthony J

Hi Anthony, Neil here. I had a similar problem with my BR05 which probably has the same motor. The issue related to the voltage of my system. I only found this out after Richard Johnson had a look at it. Other repairers could not find a problem. I would suggest speaking to Richard.

Looks like Richard posted at the same time.
1 - 3 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.