I think people worry too much about being prototypical. Just run the trains! If they go down hill into a tunnel so be it. Looking good mate. ðŸ‘
Little Salkeld
This is my latest and probably my last layout. It is in a shed on the North side of our bungalow in an area that never gets the sun and is not much use for anything else. The shed is nominally 24' by 6' but part is sectioned off for gardening tools and things. Allowing for insulation and lining this gives me a space 18' 10" by 5' 7" or 5.74m by 1.7m for the model railway. That is a good length compared to what many people have but the width is restrictive. Like my previous layouts it will be L.M.R. of B.R. in the late 1950s/early 60s and will have a flavour of the Settle and Carlisle line.
I had nearly finished the previous layout in the shed, which was a plain roundy-roundy on one level, when I realised why I had not touched it for several weeks. It was because there were too many things about it which I did not like. They were :-
(a) Regular derailments at the lifting flap which I had obviously not made well enough.
(
![]()
Even more regular derailments at the point leading into the up line storage loops, even after I had replaced it with a new one.
© I didn't like the station main building being at the front of the layout.
(d) I wanted a longer scenic run.
(e) Peco had brought out their bullhead rail with very much improved points.
I decided that I would completely dismantle and rebuild it. This time it would be a double roundy-roundy with storage loops below the station. Also the whole thing would be built high enough that ducking under to get in and out would be easy, so that the lines across the doorway could be permanent fixtures. (The fact that I am only 5' 7" means that I can easily duck under 5' or a little less.) The main station building would be at the back of the layout. I spent hours on Anyrail checking that the proposed track plan would work while keeping to the 24" minimum radius that I had on the previous layout. I decided that I would have the minimum workable gap between levels so that gradients up to the station level could be as gentle as possible. In the end I chose 70mm between levels and this resulted in gradients of between 1 in 70 and 1 in 75.
I chose Little Salkeld from the stations on the S&C because I wanted one where the refuge siding went behind the second platform and where the goods yard was to the left of the station building looking from the main lines. I think that it's the only one with these characteristics. I shall make two changes though; for visual and operating interest, I will give it an extra siding, and I will put home and starter signals on both main lines, which the real station did not have.
If I can do it successfully, here are two pictures of the storage loops before the station baseboard was put on top.
I have got quite a bit further with the construction but this will do for a first instalment.
Robert
P.S. I haven't yet got the hang of transferring pictures from the gallery.
I had nearly finished the previous layout in the shed, which was a plain roundy-roundy on one level, when I realised why I had not touched it for several weeks. It was because there were too many things about it which I did not like. They were :-
(a) Regular derailments at the lifting flap which I had obviously not made well enough.
(
© I didn't like the station main building being at the front of the layout.
(d) I wanted a longer scenic run.
(e) Peco had brought out their bullhead rail with very much improved points.
I decided that I would completely dismantle and rebuild it. This time it would be a double roundy-roundy with storage loops below the station. Also the whole thing would be built high enough that ducking under to get in and out would be easy, so that the lines across the doorway could be permanent fixtures. (The fact that I am only 5' 7" means that I can easily duck under 5' or a little less.) The main station building would be at the back of the layout. I spent hours on Anyrail checking that the proposed track plan would work while keeping to the 24" minimum radius that I had on the previous layout. I decided that I would have the minimum workable gap between levels so that gradients up to the station level could be as gentle as possible. In the end I chose 70mm between levels and this resulted in gradients of between 1 in 70 and 1 in 75.
I chose Little Salkeld from the stations on the S&C because I wanted one where the refuge siding went behind the second platform and where the goods yard was to the left of the station building looking from the main lines. I think that it's the only one with these characteristics. I shall make two changes though; for visual and operating interest, I will give it an extra siding, and I will put home and starter signals on both main lines, which the real station did not have.
If I can do it successfully, here are two pictures of the storage loops before the station baseboard was put on top.
Code:
Robert
P.S. I haven't yet got the hang of transferring pictures from the gallery.
