Model Railway Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1 Posts
Many thanks for the tip. I now use magnets from Magnet Expert Ltd www.first4magnets.com theit part number F4642. These are incredibly powerful 5mm dia x 10mm long cylindrical magnets, which, used in pairs, can be fitted from the top of the baseboard. Just drill two 5.2mm holes with 4 sleepers (and three spaces) between them and bob them in foom the top. Cover with a few grains of ballast and mark the position on the sleeper ends. The magnets come in packs of 10 at £2.85 + VAT and postage.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top