Model Railway Forum banner

methods of securing the track

3134 Views 11 Replies 10 Participants Last post by  Ken B
I have noticed that many model railway suppliers have track tacks for securing the track down to a board... However I'm not entirely happy about nailing my track down. I was windering if there are any screws which have a small enough diameter to screw the track down without causing any damage as my current layout is not going to be a perminent one and i would like to be able to remove and alter the track at will.

Many thanks
1 - 2 of 12 Posts
Then there is the Underlay Method. Glue track to underlay, as in the "Glue Method" above. Then stick the underlay down with double sided tape....
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top