Model Railway Forum banner
1 - 2 of 2 Posts

·
garage hobbit!!!
Joined
·
1,715 Posts
Looking good Paul, Love the high level track work over the station.

What radius point work are you using? As I woud replace the two points on the short platform with a double slip to give you more usable platform facing under the foot bridge, you may even be able to extend it a little

Keep us updated

Brian
 

·
garage hobbit!!!
Joined
·
1,715 Posts
Hi Paul,

position a double slip where the point to your siding is, this will then be well out of the short platform, it will also give you direct access from the other running line to the siding, but this will move the RH point up the platform on the longer platform which if this is intended as a run-round loop will not work. Get yourself a set of peco templates and offer it up (most model shops will give you them free) before you comite to buying a slip as they are a bit dear!

Hope this helps

Brian
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top