Model Railway Forum banner
1 - 1 of 1 Posts

·
DT
Joined
·
4,794 Posts
I keep quite a few locos on my layout - I'm too lazy to put them away. I don't have the sound locos on all the time and locos with lights I turn off - just to be economical, but I wouldn't want the controller resetting the decoders due to a limit in the loco stack capacity or power output capacity.

I would expect that a decoder, once set should do it's thing. If too much current is drawn then the system should cut out, not switch-off decoders of locos not currently called up on the cab.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top