[clive hayward]

Hello Enno,
welcome to the forum. Although I model SNCF I'm afraid I can't answer your question. However I'm going in to my local model shop tomorrow (in Toulon France) and will ask the Patron if he's got any ideas.

Regards

Clive

 

[clive hayward]

Hello Enno,

spoke to le "patron" this morning, he didn't have a second hand one in, but if his memory serves him rightly, once you have taken out the screws the lead weight comes off, you then need to remove the chassis. What he suggested was using 2 small screwdrivers gently prise the body away from the chassis, starting at one of the bogies. Once the 2 sides have been prised away at one end the chassis should come out easily.

Hope this helps

Clive