Model Railway Forum banner
1 - 1 of 8 Posts

· Registered
1,220 Posts
Try applying the power leads to each half of the chassis. If the motor works okay then its a pick-up problem and probbaly caused by too much oil / grease on the axles. If the motor does not work check the springs and brushes again. The power passes through brass screws from the chassis sides to the metal strips that hold the brush springs and brushes in place.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.