Model Railway Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter · #1 ·
Hi,
My brother is fencing a farm etc., using PECO 5 plank fence panels, on his layout and has tried every glue he and I can think of the fix it in place. The holes are drilled for the posts and that's fine but joining two sections together just does not work. When two panels are together you need to remove one post leaving the five rails loose these obviousley would need to be fixed to the ajoining post but nothing seems to attack the PVC/Polythene type plastic they are moulded from.
This seems to be a common requirement but I have not come across an adhesive that will do anything but jam the planks in place providing they are not touched.
 

·
Registered
Joined
·
61 Posts
Discussion Starter · #9 ·
Hi,
Thanks again for all the advice I think the Loctite route might be first choice. The panels are fitted into holes in the base but when you need to join 2 panels together you end up with 2 post side by side. Therefore he needs to cut one off and then join the loose planks to the remaining post. I am sure scratch building may be the future route but I suspect that this appeared the easy way when the panels were offered. Thanks again we will try several I am sure.
 
1 - 2 of 2 Posts
Top