Model Railway Forum banner
1 - 1 of 11 Posts

· Registered
4,553 Posts
The height above baseboard depends on the way the track is fitted. If the track is laid on foam 'ballast' or a cork underlay the platform will need to be higher as well than if the track was directly laid on to the baseboard.
So the critical dimension is the height from rail-top to Platform top. This should be around 10 to 12mm - platform heights varied a lot on the prototype, so an exact match depends on what you are trying to model.

John Webb
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.