Model Railway Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
53 Posts
Hello David,

Assuming you intend to fit the motors ABOVE the board.. ie adjacent to the track, you will need some method of disguising /covering the peco motor unit up.. with some sort of scenic addition /or building.

By far the better way, is to mount the motors underneath the board.. I but assume you have eliminated this and concluded you wish to put them on the top.

All the basic information you will need is here : for any of the recommended ways of mounting points.

the Points info is around half way down the page.


http://www.trmodels.com/controls.html

Hope this helps


Regards

Steve B
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top