You have a short circuit somewhere. Your trains would stop whether your layout was dc or dcc. Take a close look at your track plan to see where the left rail power meets power to the right rail.
power problem with dcc
Hello people new to the sight so here is my first post and problem.Brought a prodigy 2 at warley the weekend and a dcc ready class 66 i've since fitted a tcs m1 decoder and all seems fine,occasional stuter around one bend but i can live with that,now i have a simple very large loop 25 foot by 10ft its in the loft now to this i've added a sid
![]()
ing.The problem is when i manually flick the point the train stops! and i just get a buzzing noise every so often and the train slightly moves? now i'm useless at wiring and haven't a clue really so any help appreciated. Its 00 gauge ,peco code 100 track and streamline points. I'm sure its due to wiring but i haven;'t a clue!! thx
1 - 1 of 8 Posts
1 - 1 of 8 Posts
