Model Railway Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,342 Posts
Hi Eddscott

It may be set for 14 speed steps , the lights not responding are one of the symptoms described in the older Lenz decoders settings

If you read CV 29 it will give a clue to what it is set at

then select the setting for 28/128

Regards

Zmil
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top