Joined
·
13,704 Posts
QUOTE (Branchliner @ 12 Nov 2007, 09:52) <{POST_SNAPBACK}>Most of the time the system runs very well but the point of all this illustrates how fickle DCC systems can be at times.
This can be a problem with some systems (ZTC being one) as they "powere up". Some systems only apply the track power after the system has powered up & settled down. If your system suffers from this put a switch in the track feed & turn it off before powering down & on after powering up.
DCC is only fickle if their is a problem - basically, if everything is wired correctly there should be no problems.
This can be a problem with some systems (ZTC being one) as they "powere up". Some systems only apply the track power after the system has powered up & settled down. If your system suffers from this put a switch in the track feed & turn it off before powering down & on after powering up.
DCC is only fickle if their is a problem - basically, if everything is wired correctly there should be no problems.
