Model Railway Forum banner

Re-mapping an ESU decoder in a Bachmann 66 for independent lighting..

939 Views 3 Replies 2 Participants Last post by  Nigel2001
Hello all..

Does anyone know how to re-map an ESU LokSound V5 decoder in a bachmann class 66 for independent lighting with an illuminated models upgrade board???
1 - 2 of 4 Posts
Hi Nigel

I have a Lokprogrammer.. I have been loading my Legomanbiffo files onto V5 DCC decoders but i am looking to find out how I re-map the decoder for total independent lighting..

The connections are as follows:-

F0 would still be the Marker lights (direction of travel) and Red Rear lights at rear of travel.
Rear Red Lights on at BOTH ends on F20 .
Daytime Light on separate ends in direction of travel F21.
Night time Light on separate ends in direction of travel on F22.
Disable tail lights on F10.
Disable cab lights when movement started in direction of travel F19

Connections are as follows:-

Marker lights are as original. (No change in wiring)
Aux 1 Cab light No.1 end
Aux 2 Cab light No.2 end

Aux 3 Day time light No.1 end
Aux 4 Night light No.1 end
Aux 5 Red rear lights No1.end

Aux 6 Daytime light No.2 end
Aux 7 Night time light No.2 end
Aux 8 Red rear lights No.2 end

There is a Youtube video of this modification but He does not disclose the mapping...

See less See more
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.